Eisernes Ventil
317 VALVE SERIES OF IRON VALVE
SIGHT GLASS/DIAPHRAGM CONTROL VALVE/CYLINDER-TYPE CONTROL VALVE/FLOAT VALVE/Y-STRAINER/AIR RELEASE VALVE/KNIFE GATE VALVE/SWING CHECK VALVE/GLOBE VALVE/GATE VALVE/WAFER TYPE DUAL-PLATE CHECK VALVE
Petroleum chemical metallurgy electric power construction heating plumbing water treatment…etc.
We provide various 317 Brand valve series of thermodynamic steam trap, safety relief valve, pressure reducing valve, ball valve, gate valve, globe valve, check valve, butterfly valve, floating ball valve, sight glass, needle valve, wafer check valve, pneumatic actuator, diaphragm & cylinder control valve, Y-strainer, water gauge cock & valve, air vent, bellows, expansion joint, flexible joint, ST.ST. tube & high pressure #2000, #3000, #6000, #9000 fittings, mit-UNiD-cns solenoid valve & electric actuator.
SIGHT GLASS/DIAPHRAGM CONTROL VALVE/CYLINDER-TYPE CONTROL VALVE/FLOAT VALVE/Y-STRAINER/AIR RELEASE VALVE/KNIFE GATE VALVE/SWING CHECK VALVE/GLOBE VALVE/GATE VALVE/WAFER TYPE DUAL-PLATE CHECK VALVE
Petroleum chemical metallurgy electric power construction heating plumbing water treatment…etc.
We provide various 317 Brand valve series of thermodynamic steam trap, safety relief valve, pressure reducing valve, ball valve, gate valve, globe valve, check valve, butterfly valve, floating ball valve, sight glass, needle valve, wafer check valve, pneumatic actuator, diaphragm & cylinder control valve, Y-strainer, water gauge cock & valve, air vent, bellows, expansion joint, flexible joint, ST.ST. tube & high pressure #2000, #3000, #6000, #9000 fittings, mit-UNiD-cns solenoid valve & electric actuator.
(SK-B2) CAST IRON SIGHT GLASS FLANGED END (FLAPPER TYPE)
TESTER
CAST IRON SIGHT GLASS
DOUBLE WINDOW.
FLANGED END TO JIS 10K OR ANSI 150 LBS.
DRILLED. BODY: CAST IRON
SIZE: 1/2”~8”
CAST IRON SIGHT GLASS
DOUBLE WINDOW.
FLANGED END TO JIS 10K OR ANSI 150 LBS.
DRILLED. BODY: CAST IRON
SIZE: 1/2”~8”
(YS-R3S) CAST IRON Y-STRAINER CLASS 10K AND 150LBS
CAST IRON Y-STRAINER CLASS 10K
SCREWED END TO BS21, ANSI B2.1
OR DIN-259. BODY: FC20
WITH S.S.SCREEN.
SIZE: 1/2”~3”
SCREWED END TO BS21, ANSI B2.1
OR DIN-259. BODY: FC20
WITH S.S.SCREEN.
SIZE: 1/2”~3”
(FT-551) CAST IRON & STAINLESS STEEL BALL FLOATING VALVE
CAST IRON BALL FLOATING VALVE
FLANGED END TO JIS 10K, ANSI 150.
DRILLED. BODY: FC20
SIZE: 1-1/2”~8”
ALT. BODY: SUS 304 / SUS 316.
FT304-551 / FT316-551
FLANGED END TO JIS 10K, ANSI 150.
DRILLED. BODY: FC20
SIZE: 1-1/2”~8”
ALT. BODY: SUS 304 / SUS 316.
FT304-551 / FT316-551
(PR-3AS) CAST IRON PRESSURE REDUING VALVE
CAST IRON PRESSURE REDUCING
VALVE CLASS 10K
SCREWED END TO BS21, ANSI B2.1
OR DIN-259. BODY: FC20
SIZE: 1/2”~1”
VALVE CLASS 10K
SCREWED END TO BS21, ANSI B2.1
OR DIN-259. BODY: FC20
SIZE: 1/2”~1”
(YS-R3F) CAST IRON Y-STRAINER CLASS 10K AND 150LBS
CAST IRON Y-STRAINER CLASS 10K
FLANGED END TO JIS 10K, ANSI 150 LBS
OR BS4504 STD PN16 OR PN10. BODY: FC20
SIZE: 1-1/2”~12”
FLANGED END TO JIS 10K, ANSI 150 LBS
OR BS4504 STD PN16 OR PN10. BODY: FC20
SIZE: 1-1/2”~12”
(S3S-LR) GUSSEISEN NIEDER HUB SICHERHEITSVENTIL MIT SCHRAUBANSCHLUSS
CAST IRON SAFETY RELIEF VALVE
SCREWED END TO BS21, ANSI B2.1
DISC/SEAT: SUS304.
SET: 1 ~ 10 KGS/CM2.
SIZE: 1/2”~2” (WITH LEVER)
ALT. BODY: SUS 304 / SUS 316.
S34-LR / S36-LR (1~20 KGS/CM2)
SCREWED END TO BS21, ANSI B2.1
DISC/SEAT: SUS304.
SET: 1 ~ 10 KGS/CM2.
SIZE: 1/2”~2” (WITH LEVER)
ALT. BODY: SUS 304 / SUS 316.
S34-LR / S36-LR (1~20 KGS/CM2)
(S3F-A) NIEDERHUB-GUSSEISEN SICHERHEITSVENTILMIT FLANSCHANSCHLUSS
CAST IRON SAFETY RELIEF VALVE
FLANGED END TO JIS 10K OR ANSI
150 LBS. DRILLED. DISC: SUS304.
SET P.: 1 ~ 10 KGS/CM2.
SIZE: 1”~12” (WITHOUT LEVER)
ALT. BODY: SUS 304 / SUS 316.
S34F-A / S36F-A (1~20 KGS/CM2)
FLANGED END TO JIS 10K OR ANSI
150 LBS. DRILLED. DISC: SUS304.
SET P.: 1 ~ 10 KGS/CM2.
SIZE: 1”~12” (WITHOUT LEVER)
ALT. BODY: SUS 304 / SUS 316.
S34F-A / S36F-A (1~20 KGS/CM2)
(S3F-LR) NIEDERHUB-GUSSEISEN SICHERHEITSVENTILMIT FLANSCHANSCHLUSSL
CAST IRON SAFETY RELIEF VALVE
FLANGED END TO JIS 10K OR ANSI
150 LBS. DRILLED. DISC: SUS304.
SET P.: 1 ~ 10 KGS/CM2.
SIZE: 1”~12” (WITH LEVER)
ALT. BODY: SUS 304 / SUS 316.
S34F-LR / S36F-LR (1~20 KGS/CM2)
FLANGED END TO JIS 10K OR ANSI
150 LBS. DRILLED. DISC: SUS304.
SET P.: 1 ~ 10 KGS/CM2.
SIZE: 1”~12” (WITH LEVER)
ALT. BODY: SUS 304 / SUS 316.
S34F-LR / S36F-LR (1~20 KGS/CM2)
(SVPF-10SA) FULL BORE CAST IRON SAFETY RELIEF VALVE SCW*SCW
FULL BORE SAFETY RELIEF VALVE
SCREWED END TO BS21, ANSI B2.1
BODY: FC. SEAT: CF8. (1*2)
DISC/SEAL: SUS304+PTFE.
SET P.: 1-10 KGS/CM2. (ALT.16K)
SIZE: 1”~2” (WITHOUT LEVER)
SCREWED END TO BS21, ANSI B2.1
BODY: FC. SEAT: CF8. (1*2)
DISC/SEAL: SUS304+PTFE.
SET P.: 1-10 KGS/CM2. (ALT.16K)
SIZE: 1”~2” (WITHOUT LEVER)
(SVPF-10SLR) FULL BORE CAST IRON SAFETY RELIEF VALVE SCW*SCW
FULL BORE SAFETY RELIEF VALVE
SCREWED END TO BS21, ANSI B2.1
BODY: FC. SEAT: CF8. (1*2)
DISC/SEAL: SUS304+PTFE.
SET P.: 1-10 KGS/CM2. (ALT.16K)
SIZE: 1”~2” (WITH LEVER)
SCREWED END TO BS21, ANSI B2.1
BODY: FC. SEAT: CF8. (1*2)
DISC/SEAL: SUS304+PTFE.
SET P.: 1-10 KGS/CM2. (ALT.16K)
SIZE: 1”~2” (WITH LEVER)
(SVPF-12SLR) FULL BORE CAST IRON SAFETY RELIEF VALVE FLG*SCW
FULL BORE SAFETY RELIEF VALVE
FLANGED 10K/150 TO SCREWED END
BODY: FC. SEAT: CF8. (1*2)
DISC/SEAL: SUS304+PTFE.
SET P.: 1-10 KGS/CM2. (ALT.16K)
SIZE: 1”~2” (WITH LEVER)
ALT. SIZE: (1*2)
FLANGED 10K/150 TO SCREWED END
BODY: FC. SEAT: CF8. (1*2)
DISC/SEAL: SUS304+PTFE.
SET P.: 1-10 KGS/CM2. (ALT.16K)
SIZE: 1”~2” (WITH LEVER)
ALT. SIZE: (1*2)
(BV-13F) 2-PC BALL VALVE FLANGED END TO JIS 10K
JIS 10K 2-PC BALL VALVE
FLANGED END TO JIS 10K DRILLED
FULL PORT.
BODY: FC20
SIZE: 1/2”~10”
FLANGED END TO JIS 10K DRILLED
FULL PORT.
BODY: FC20
SIZE: 1/2”~10”
(BV-61F) 2-PC FLANGE BALL VALVE (FULL BORE) PN10/16
DIN PN10/PN16 2-PC BALL VALVE
FLANGED END TO DIN PN10 / PN16.
DRILLED. FULL PORT. F TO F: F4/F5.
BODY: FC20 (ALT.WCB/CF8M)
SIZE: 1/2”~12”
FLANGED END TO DIN PN10 / PN16.
DRILLED. FULL PORT. F TO F: F4/F5.
BODY: FC20 (ALT.WCB/CF8M)
SIZE: 1/2”~12”
(SK-T6) CAST IRON SIGHT GLASS SCREWED END (MINIATURE TYPE)
TESTER
CAST IRON MINI TYPE SIGHT GLASS
SCREWED END TO BS21 OR ANSI B2.1 BODY: CAST IRON
SIZE: 1/2”~2”
CAST IRON MINI TYPE SIGHT GLASS
SCREWED END TO BS21 OR ANSI B2.1 BODY: CAST IRON
SIZE: 1/2”~2”
(SK-T8) CAST IRON SIGHT GLASS SCREWED END (TEFLON BALL)
TESTER
CAST IRON SIGHT GLASS
TEFLON BALL INSIDE.
SCREWED END TO BS21 OR ANSI B2.1
BODY: CAST IRON
SIZE: 1/2”~2”
CAST IRON SIGHT GLASS
TEFLON BALL INSIDE.
SCREWED END TO BS21 OR ANSI B2.1
BODY: CAST IRON
SIZE: 1/2”~2”
